Formax 6404 Series - Manual (Page 100)

2. Rotate a slightly moistened cotton swab in the upper hole, to clean the upper exit
sensor.
3. Calibrate the photocells (see Resetting photocells on page 93).
Resetting Photocells
To calibrate all photocells:
1.
In the Test menu, press the [Reset photocells] button.The Calibrate photocells menu
appears.
2. Remove all documents and envelopes and close all covers before starting the
calibration.
3. In the Calibrate photocells menu, press the [Cal.] button.
When the calibration is finished, the system returns to the Calibrate photocells menu.
9
En
glish
93
| Page 93 | jan-06-2012 13:58 |