Test menu, Est (see, En glish – Formax 6404 Series User Manual
Page 70
2.
Use the keypad to enter the license key code that you received from the supplier to
activate the relevant option on this machine.
If needed, use the arrow keys to navigate through the entered characters.
3.
Press the
[OK] button to add the licensed option.
The system will now verify the license key.
4.
Switch the system off and on.
Test Menu
The Test menu can be used to check the system, reset all photocells and execute reading
tests.
The menu consists of the following functions:
• Diagnostics - Use this function to check if all motors, clutches and sensors are
correctly connected. This test derives the status of the actuators and clutches by
briefly activating the actuators and then measuring the current (see
on page 64);
• Reset photocells - Use this function to calibrate all photocells (see
on page 93);
• OMR test - Use this function to test the OMR functionality (see
on page 80);
• BCR test - Use this function to test the BCR functionality (see
on page 76).
6
En
glish
63
| Page 63 | jan-06-2012 13:58 |