Formax 6404 Series - Manual (Page 27)

Filling the Sealing Liquid Reservoir
1. Open the front cover A.
2. Fill the reservoir B to the "Max" lip with sealing liquid.
3. Close the front cover A.
Before starting the job, wait approximately 5 minutes for the brushes to moisten or use
moistened brushes. For instructions on the installation of brushes, see Clean and replace
brushes on page 91.
If the liquid reservoir is almost empty the touchscreen shows a message to warn you that
you should refill the reservoir.
Shut Down the System
1. Press the [On/Off] button to shut down the system.
When the system is busy, it completes and inserts the current set, stops and will be shut
down.
20
| Page 20 | jan-06-2012 13:58 |
2
En
glish