Formax 6404 Series - Manual (Page 24)

Filling the Document Feeder Tray
Fill the document feeder tray as follows:
1.
Open the left-hand side guide A by turning it downwards.
The feed rollers will automatically be lifted.
2. Place a stack of documents between the side guides.
3. Turn the left side guide upwards again.
4. Feed the documents (depending on the type of documents and the type of fold) (see
Document Orientation on page 16).
Loading Envelopes
Before you load the envelopes, make sure the envelope separation and side guides are
correctly set. Proceed as follows:
1.
Rotate thumb wheel D to move the side guides C apart.
2. Put a small stack of envelopes between the side guides.
2
En
glish
17
| Page 17 | jan-06-2012 13:58 |