Envelope hopper, Lower envelope track, En glish – Formax 6404 Series User Manual
Page 105
Envelope Hopper
When an envelope gets stuck in this area, remove the envelope as follows:
1.
Pull down small lever
B. Pins C will come down.
2.
Push lever
A to the right and hold it. Pins C will go up.
3.
Remove the stuck envelope.
4.
Release lever
A.
5.
Make sure the separation setting is still correct (see
on page 17).
6.
Return lever
B.
7.
Press the
[Reset] button to reset the error and restart the job.
Lower Envelope Track
When a stoppage occurs in the lower envelope track, remove the envelopes as follows:
If needed, envelopes can be transported manually to the insert table or lower envelope
track by means of handle
C. To transport a mail set manually, turn handle B.
1.
Open the side cover.
2.
Squeeze blue handles
A to unlock the rollers of the envelope track.
98
| Page 98 | jan-06-2012 13:58 |
10
En
glish