FSR FL-700 - Manual (Page 2)

Step 5
Place outer door trim ring on top of the mounting plate insert and install all the screws. Use an alternate corner
pattern to tighten.
Step 6
Install the inner gasket over mounting screws. Do not stretch the gaskets while installing.
Step 7
Install the chain between the insert and the inner cover.
Step 8
Place the inner cover on the housing and press fi rmly on the center to form the new gasket. Turn the fourquar-
ter-turn cover screws clockwise to secure the cover.
Step 9 Make sure all of the screws are completely seated to avoid a"trip" hazard.