FSR TM-IPAD-TR - Manual (Page 2)

4. REASSEMBLE BASE COVER.
BASE COVER
(2) COVER SCREW
5. REMOVE FRONT COVER.
ROUTE USB CONNECTOR (OR POWER
SUPPLY WIRING IF USING USB CHARGER KIT)
THRU COVER OR CABLE ACCESS HOLE
AS REQUIRED
FRONT COVER
(RETAIN FOR
REASSEMBLY)
(4) COVER SCREW
(RETAIN FOR
REASSEMBLY)
(4) COVER SCREW
FRONT COVER
6. REASSEMBLE FRONT PANEL WITH IPAD. EXPLODED VIEW FOR
REFERENCE. SEE BACK PAGE FOR FINAL ASSEMBLY.
IPAD (SUPPLIED BY CUSTOMER)
IPAD CONNECTOR (SUPPLIED)
USB CHARGER
SNAP-IN CONNECTOR
(USB CHARGER KIT
SOLD SEPARATELY)
SNAP-IN BRACKET
INCLUDED APPLE
CORD, USB END
SNAP-IN BRACKET
ASSEMBLY
SKIP TO STEP 4 IF NOT USING USB CHARGER
SNAP-IN CONNECTOR OPTION. 3.
3a. REMOVE SNAP-IN BRACKET.
SNAP-IN BRACKET
(INCLUDED)
#6 FLAT-HEAD SCREW
(RETAIN FOR REASSEMBLY)
3b. INSTALL USB CHARGER SNAP-IN CONNECTOR ONTO SNAP-IN
BRACKET. CONNECT USB END TO USB CHARGER.
3c. REINSTALL SNAP-IN BRACKET ASSEMBLY.
#6 FLAT-HEAD SCREW
ROUTE POWER SUPPLY WIRING THRU
CABLE PASS-THRU (RECOMMENDED) AND
MAKE NECESSARY TERMINAL CONNECTIONS
(SEE KIT INSTALLATION INSTRUCTIONS)
HIGHLY RECOMMENDED WIRES BE
ROUTED THRU CABLE ACCESS HOLE
FOR SWIVEL UNITS
WIRING STRAIN RELIEF
TIE WRAP HOLE