Installation wiring – GAI-Tronics 234L(x)-xxx LITE Series Stanchions User Manual
Page 10
Advertising
Pub. 42004-393B
Model 234L(x)-xxx LITE Series Stanchion
Page: 9 of 18
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-393b.doc
03/07
Installation Wiring
NOTE
All connections must be made in accordance with the National Electrical Code (NEC)
in the United States or the Canadian Electrical Codes (CEC) in Canada. External power should not be
applied to the stanchion until all wiring has been completed. The NEC will require a minimum No. 18
AWG wire for the field wiring of the ac mains and an appropriate disconnect device shall be provided as
part of the building installation.
Figure 5. Connection Diagram
Advertising