GAI-Tronics 234L(x)-xxx LITE Series Stanchions - Manual (Page 2)

Pub.: 42004-393B
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 234L(x)-xxx
LITE Series Stanchion
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
GAI-Tronics Model 234L(x)-xxx LITE (Lightweight Illuminated Telecommunications Enclosure) Series
Stanchions are designed for use in commercial environments to house GAI-Tronics telephones. The
LITE Series Stanchions are designed for wall mounting, and are comprised of a front stanchion body and
rear mounting plate.
The LITE Series Stanchions are available in both ac and 12 V dc versions. The standard LITE Series
Stanchion body is made of a durable 3/16-inch nominal thickness acrylic sheet in safety yellow with black
ASSISTANCE graphics applied on each side. The 1/16-inch thick aluminum rear mounting plate is
powder coated gray for maximum durability. An additional eight stanchion colors and four graphics are
also available.
Two LED lights are mounted on the front of the stanchion. The LED locator light contains super bright
LEDs that are visible even in sunlight. The courtesy LED panel light provides nighttime illumination of
the telephone.
The blue beacon mounted on top of the stanchion provides a visual indication that the stanchion telephone
is in use. When used with the GAI-Tronics Series 297 and 298 Series Push-Button Phones, the blue
beacon energizes when the red push button is activated and will remain activated until the call is
terminated. When used with the GAI-Tronics Series 276 and 277 Handset Phones, the blue beacon
energizes when the handset is lifted from the cradle, and remains activated until the handset is hung up.
Refer to the Telephone Installation section on page 13.