Setup, Field wire installation – GAI-Tronics 293-700 VoIP Telephone User Manual

Page 13

Advertising

42004-397G

ELEPHONES

AGE

11 of 23

f:\standard ioms - current release\42004 instr. manuals\42004-397g.doc
11/09

Setup

Field Wire installation

After all the field wires are pulled through the rear enclosure, install all connections as indicated below.
Refer to Figure 16 for wiring details. Refer to Table 1 on page 12 for the recommended conductor sizes.

OTE

: Consult the National Electrical Code (NFPA 70), Canadian Standards Association (CSA 22.1),

and local codes for the specific requirements regarding your installation. Install all equipment without
modification and according to the local and national codes. Class 2 circuit wiring must be performed in
accordance with NEC 725.55.

Figure 16. VoIP Phone PCB Assembly

Advertising

This manual is related to the following products:

293AL-700 VoIP Telephone, 297-700 VoIP Telephone, 297-702 VoIP Telephone, 298-701 VoIP Telephone, 294AL-702 VoIP Telephone, 297-701 VoIP Telephone, 297-703 VoIP Telephone, 298-702 VoIP Telephone, XTA0003A Radio Cable, 12564-002 Party Line Knob Kit (EuroPage), 12598-004 Redundant 48 V DC Module, XGM003A Gooseneck Microphone Kit, 12515-007, 12515-008, 12515-009 Pressbar Handset with Hytrel Cord Replacement Kit, 10959-207 and 10959-208 Rack-mount Audio Messenger Interface, 10959-201 and 10959-203 Wall-mount Audio Messenger Interface, 10959-903 Wall-Mount Audio Messenger Interface (AMI), 12598-002 Redundant 5 V DC Module, 13340 Constant Directivity Horn, 231-001 Pole Mounting Kit, 227-003 Auto-dial S.M.A.R.T. Phones, 247-003 Auto-dial S.M.A.R.T. Phones, 257-003 Auto-dial S.M.A.R.T. Phones, 277-003 Auto-dial S.M.A.R.T. Phones, 226-003 S.M.A.R.T. Phones with Keypads, 256-003 S.M.A.R.T. Phones with Keypads, 246-003 S.M.A.R.T. Phones with Keypads, 276-003 S.M.A.R.T. Phones with Keypads, XTI0001A-G3 Radio Cable

Popular Brands

Popular manuals