Sip settings page – GAI-Tronics VoIP Basic Programming Guide User Manual

Page 6

Advertising
background image

Pub. 42004-481B

VoIP Telephone Basic Programming Guide

Page 5 of 28

f:\standard ioms - current release\42004 instr. manuals\42004-481b.doc
10/13

SIP Settings Page

The SIP Settings page is used to view or change parameters specific to the SIP signaling protocol. GAI-
Tronics VoIP telephones can hold details of up to four SIP proxies. If the telephone is unable to register
or make a call, it can roll over to the next in a prioritized sequence.

There is a SIP Info page for each of the four possible endpoints, and a General SIP Info page containing
details common to them all. The four endpoint pages are sub-pages of the General page, which is shown
in Figure 2 below.

For basic configurations, allow the SIP General Proxy parameters on the General SIP Info page to remain
at default.

Figure 2. General SIP Info Page

Advertising
This manual is related to the following products: