Operation, Lcd display at initial power up – GAI-Tronics 10959-209 Audio Messenger Interface for ADVANCE User Manual
Page 12

Pub. 42004-492A
M
ODEL
10959-209
A
UDIO
M
ESSENGER
I
NTERFACE FOR
ADVANCE
P
AGE
10 of 16
f:\standard ioms - current release\42004 instr. manuals\42004-492a.docx
08/14
Operation
Once the CompactFlash
®
is programmed and installed into the unit, the unit operates based on system
inputs and outputs or by manual operation from the front of the rack-mount unit.
LCD Display at Initial Power Up
At initial power up, the AMI unit completes a self-diagnostic of its settings. The LCD display cycles
through the following messages:
AMI firmware version
Boot DSP
Media detected
EEPROM firmware version
DSP firmware version
Progress bar/LOAD CONFIG
Configuration version
Configuration date and time
Configuration file name
HIO not installed.
ASM not installed.
Page/Party
®
board firmware version
AMI Main board firmware version
Telephone Interface Mode
Telephone Interface Board firmware version
Telephone Interface Greeting file name (if recording a new greeting)
AMI ready
Time, page symbol/date