Power, Pbx connection – GAI-Tronics 10959-209 Audio Messenger Interface for ADVANCE User Manual
Page 8

Pub. 42004-492A
M
ODEL
10959-209
A
UDIO
M
ESSENGER
I
NTERFACE FOR
ADVANCE
P
AGE
6 of 16
f:\standard ioms - current release\42004 instr. manuals\42004-492a.docx
08/14
Power
The terminal block labeled CLASS
2,
12
VDC provides power connection for the AMI.
Table 2. Power Assignment
Metalwork
Label
Internal Terminal
Pin-Out
Function or ACT Description
+
TB6-1
Positive terminal of external power supply
−
TB6-2
Negative terminal of external power supply
GND
TB6-3 Frame
ground
PBX Connection
The connector labeled PBX provides connection to a standard PBX analog station port.
Page/Party
®
The connector labeled P
AGE
/P
ARTY
provides connection to a Page/Party
®
system.
Table 3. Page/Party
®
Assignment
Metalwork
Label
Internal Terminal
Pin-Out
Function or ACT Description
Party L1
P1-1
The 33-ohm line interface to party line 3, 4 or 5.
(Internal 33-ohm termination)
Party L2
P1-2
Page L1
P1-3
Not typically used.
(External 33-ohm termination required)
Page L2
P1-4
N
OTE
: Pin 1 on this connector is on the right side.