Compactflash, Card installation, Specifications – GAI-Tronics 10959-209 Audio Messenger Interface for ADVANCE User Manual

Page 17

Advertising
background image

Pub. 42004-492A

M

ODEL

10959-209

A

UDIO

M

ESSENGER

I

NTERFACE FOR

ADVANCE

P

AGE

15 of 16

f:\standard ioms - current release\42004 instr. manuals\42004-492a.docx
08/14

CompactFlash

®

The CompactFlash

®

memory card stores the system configuration, speech messages, and alarm tones.

Card Installation

When the memory card is being installed, complete the following instructions:

Insert the memory card through the rectangular MEMORY

CARD slot on the front panel. Ensure the

label on the memory card faces up and slide the memory card in until it is fully seated in the slot. When
seated properly, the card protrudes approximately ¼ inch from the front of the socket.

N

OTE

: The memory card and its socket are keyed for proper insertion – do not force the card into the

socket.

Reboot the system so the AMI unit can read the memory card.

Specifications

Power Supply Requirements
Voltage ......................................................................................... 12 V dc (UL listed) Class 2 power source

(plug-in 12 V dc power supply included with AMI)

Current ................................................................................................................................. 1 amp minimum
Power consumed .............................................................................................................. 10 watts maximum

Audio
Speech capacity ................................................................... 500 minutes with 512 Mb CompactFlash

®

card

Scheduled events ........................................................................................................................ 29 maximum
Frequency response ............................................................................ 250–6500 Hz, +0/−3 dB ref. to 1 kHz
Distortion ........................................................................................ <1% THD @ 1 kHz @ nominal settings

33-ohm page line............................................................................................................... 1.5 Vrms nominal
33-ohm party line .............................................................................................................. 1.5 Vrms nominal
Telephone line .................................................................................................................... −10 dBm nominal

Output
Status .................................................................................................................................... 1 amp maximum

Communications
ADVANCE ........................................................................................................................................ RS-485
Phone line ........................................................................................................................................... DTMF
Enclosure
Material .................................................. Steel body with aluminum cover; black, fine-textured paint finish
Mounting ............................................................................................................ 1U in standard 19-inch rack
Dimensions ....................................................... 17.00 W

 11.18 D  1.72 H inches; (432  284  44 mm)

Weight ................................................................................................................................. 8.5 lbs. (3.86 kg)

Environmental
Temperature range ................................................................................... +32º F to +122º F (0º C to +50º C)

FCC Information
Complies with CFR47, Part 15 .......................................................................................................... Class A

Advertising