GAI-Tronics 10962-001, 10962-002 AMI Redundant Controller Modules - Manual (Page 12)

Pub. 42004-708L2B
Model 10962-001 and 10962-002 AMI Redundant Controller Modules Page: 12 of 17
f:\standard ioms - current release\42004 instr. manuals\42004-708l2b.doc
06/10
Operation
LCD Display
A two-line LCD display is mounted on the front of the ARC to indicate operational status of the ARC
and AMI.
The first line of the display is a text message indicating various AMI operations as follows:
Message Meaning
AMI:R ESPONDING AMI responded with IDLE status following a status request from the ARC.
AMI:N O R ESPONSE The AMI has not responded to the status request from the ARC for 5 seconds.
AMI:P LAYING AMI is currently playing a message or page.
AMI:M UTED The AMI’s audio output is muted, but the AMI is playing a message or a
telephone page.
AMI:F AILED The AMI has denied a request from the ARC; or the AMI has returned an
unrecognizable response.
AMI:N OT R EADY The AMI has returned a “Not Ready” response to a status request from the ARC.
AMI:M EDIA E RR The AMI has returned a fault to the ARC, indicating that the Compact Flash
memory card has been removed.
AMI:A UDIO E RR The AMI has returned a fault to the ARC, indicating the AMI cannot detect
audio at its internal monitoring circuit.
AMI:RS485 E RR The AMI has returned a fault to the ARC, indicating an RS-485 communications
failure with one or more modules.
AMI:DSP E RR The AMI has returned a fault to the ARC, indicating communications with its
internal digital signal processor (DSP) has stopped.