Speaker gain setting, Transmit level, Receiver volume – GAI-Tronics 701-302ICS ICS AC-Powered Page/Party Plug-in Amplifiers User Manual
Page 8
Pub. 42004-730L2B
ICS AC-Powered Page/Party
®
Plug-in Amplifiers
Page: 6 of 20
f:\standard ioms - current release\42004 instr. manuals\42004-730l2b.doc
04/11
Speaker Gain Setting
P9 on the Main PCBA can limit the maximum speaker output level. To change the speaker gain setting,
remove the amplifier from the enclosure. Open the amplifier as previously described. P9 in the
30W
position (default) represents a 30-watt maximum output. P9 in the
2W
position represents a 2-watt
maximum output.
Warning: Maximum output power may exceed rated speaker wattage resulting in speaker damage.
Handset Level Settings and Adjustments (Models 701-302ICS & 701-
304ICS Only)
Refer to Figure 6 for locations.
Transmit Level
If the signal level from the handset to the page or party lines requires adjustment, remove the amplifier
from the enclosure and place it on a stable surface. Open the amplifier as previously described. Use the
LINE
ADJ
potentiometer, R34, on the Main PCBA to make the adjustment.
Receiver Volume
If the receiver volume requires adjustment, remove the amplifier from the enclosure. Open the amplifier
as previously described. Use the Receiver Volume potentiometer, R5 on the Main PCBA to adjust the
signal level to the handset receiver from the page or party lines.
N
OTE
: It does not adjust the signal level to the Model 701-304ICS auxiliary headset.