Troubleshooting, Opening the station, Jumper settings – GAI-Tronics ICS Zone 2/22 Weatherproof Page/Party Station User Manual
Page 28: P4 standard jumper configuration
Pub. 42004-734L2D
ICS Zone 2/22 Weatherproof Page/Party
®
Station
Page 26 of 33
f:\standard ioms - current release\42004 instr. manuals\42004-734l2d.doc
11/14
Troubleshooting
Opening the Station
Remove the four screws from the front panel and turn it to the right so that the interior surface faces you.
Allow the wiring and ribbon cables to remain connected. The front panel can be hung from the front door
by hooking a small piece of wire in the mounting holes of the panel. The front panel interior surface and
the back box interior now face you. This configuration presents the easiest access for troubleshooting and
setting adjustments.
Jumper Settings
P4 Standard Jumper Configuration
For standard operation, without options, P4 requires jumper installation for proper operation. See Figure
21 for jumper locations.
Figure 21. P4 Jumper Default Settings