GAI-Tronics MI05-101 Merge / Isolate Cabinet with External Option - Manual (Page 19)

Pub. MI05-101iom.2
Model MI05-101 Merge/Isolate Cabinet Page: 19 of 24
\\86h27g1-fs\iomdocs\opnotes -- released\mi05-00x merge-isolate cabs\mi05-101.dir\mi05-101iom2.doc
01/09
Telephone Interface Screen
2. The Announcement Output Combination must be set to Output 1 . This will cause output 1 to
activate while telephone paging is active. The M/I cabinet will merge all zones during the telephone
page as a result of the active output. Also the
Pre-Announcement Tone and Telephone Paging
Priority must be set to the lowest priority to prevent telephone pages from interfering with alarms or
master station pages.
For additional features regarding the AMI telephone interface, refer to help screens supplied with the
AMI programming software. The changes noted above are the minimum changes required to allow the
telephone paging access to the Model MI05 Series Merge/Isolate Cabinets.