GAI-Tronics MI05-101 Merge / Isolate Cabinet with External Option - Manual (Page 7)

Pub. MI05-101iom.2
Model MI05-101 Merge/Isolate Cabinet Page: 7 of 24
\\86h27g1-fs\iomdocs\opnotes -- released\mi05-00x merge-isolate cabs\mi05-101.dir\mi05-101iom2.doc
01/09
J6 –is a 3-position jumper that selects either RS-232 or RS-485 data communication. Always select
RS-485 by inserting the shorting clip across pins 2 and 3 on J6.
J7 –is a 3-position jumper that puts the board in programming mode. Always select run mode by
inserting the shorting clip across pins 1 and 2 on J7.
Figure 3. Master I/O Controller Module (Cover removed)