Dynex DX-G1113 - Manual (Page 14)

14 Installing your car stereo
Buick
Riviera 1990-1995
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the two torx-head screws above the instrument cluster and one torx-head
screw from each AC vent.
3 Unsnap the panel.
4 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
5 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 14 Wednesday, August 16, 2006 3:38 PM