Dynex DX-G1113 - Manual (Page 60)

60 Installing your car stereo
Oldsmobile
Toronado 1982-1985
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Depress the clip located behind the headlight knob, then remove the knob.
3 Remove the three screws that secure the steering column trim, then remove it.
4 Remove the four screws from the bottom edge of the dash trim bezel, then remove it.
5 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
6 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 60 Wednesday, August 16, 2006 3:38 PM