Dynex DX-G1113 - Manual (Page 26)

26 Installing your car stereo
Chevrolet
Beretta 1991-1996
Corsica 1991-1996
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Using a panel removal tool, pry outward on the dash trim bezel, then remove it.
3 Remove the two screws that secure the factory head unit, then disconnect the wiring.
4 Locate bracket 7.
5 Go to “Completing the installation” on page 76.
DX-G1113.fm Page 26 Wednesday, August 16, 2006 3:38 PM