Dynex DX-G1113 - Manual (Page 22)

22 Installing your car stereo
Cadillac
Escalade 1999-2002
Chevrolet
Pickup 1995-2002
Suburban 1995-2002
Tahoe 1995-2002
Silverado 1999-2002
GMC
Sierra 1995-2002
Suburban1995-2002
Yukon 1995-2002
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the steering column filler panel and the ashtray.
3 Unclip the dash trim bezel, then remove it.
4 Using a flat-blade screwdriver, press down on the outer clips of the factory head unit
(or pocket), then disconnect the wiring and remove the head unit.
5 Locate bracket set 8.
6 Go to “Completing the installation” on page 76.
DX-G1113.fm Page 22 Wednesday, August 16, 2006 3:38 PM