Dynex DX-G1113 - Manual (Page 72)

72 Installing your car stereo
Pontiac
Grand Prix 1994-1996
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Using a small set of pliers, grasp the retaining clip on the back of the gear shift handle,
then remove the clip.
3 Remove the gear shift handle.
4 Unclip the center console, then remove it.
5 Remove the two exposed 7 mm hex-head screws under the climate controls.
6 Unclip the radio trim bezel, then remove it.
7 Remove the two 7 mm hex-head screws that secures the factory head unit, then
disconnect the wiring.
8 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
9 Go to “Completing the installation” on page 76.
DX-G1113.fm Page 72 Wednesday, August 16, 2006 3:38 PM