Dynex DX-G1113 - Manual (Page 29)

Installing your car stereo 29
Chevrolet
Camaro 1982-1984
Pontiac
Firebird 1982-1984
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the four star-drive screws from the dash trim bezel, then remove the bezel.
Remove the four screws that secure the factory head unit, then remove the head unit.
3 Cut and remove all mounting tabs on bracket 2 except the A tabs. Each mounting tab
has a letter stamped on the back of the tab. Cut the tabs with the blade pointed away
from you and your fingers.
4 Go to “Completing the installation” on page 76.
A
DX-G1113.fm Page 29 Wednesday, August 16, 2006 3:38 PM