Dynex DX-G1113 - Manual (Page 27)

Installing your car stereo 27
Chevrolet
Blazer (full size) 1988-1991
Suburban 1988-1991
GMC
Jimmy (full size) 1989-1991
Suburban 1989-1991
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the two screws from the radio trim bezel, then remove the bezel.
3 Remove the two screws that secure the factory head unit, then disconnect the wiring.
4 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
5 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 27 Wednesday, August 16, 2006 3:38 PM