Dynex DX-G1113 - Manual (Page 53)

Installing your car stereo 53
Chevrolet
Venture 1997-1999
Oldsmobile
Silhouette 1997-1999
Pontiac
Montana 1999
TransSport 1997-1998
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the ashtray, then remove the one exposed Phillips screw in the ashtray
compartment.
3 Remove the one Phillips screw from the cigarette lighter compartment.
4 Remove the two Phillips screws that secure the factory head unit, the disconnect the
wiring.
5 Locate bracket set 10.
6 Go to “Completing the installation” on page 76.
DX-G1113.fm Page 53 Wednesday, August 16, 2006 3:38 PM