Gasboy PC CFN site controller - Manual (Page 25)

MDE-4489 Gasboy® PC/CFN User’s Guide·July 2005 Page 21
If you are Running PC/FUEL PC/CFN Basics
Recommended Tank Inventory Management
The following tank inventory functions may be performed according to your site's established
procedures:
Sticking the Tank - Recommended Interval, Once a Day
1 Ensure that no one is pumping. Block off island, if necessary.
2 Stick the tanks and record the level information. If you are entering data at the PC, be sure to
note date/time and skip to Step 4.
3 Insert the dipstick card/key into the fuel management system and enter the data.
4 Resume fueling at the site.
5 Enter the data at the PC if not using dipstick card/key (Files, Tanks, Enter Stick Reading).
Delivery - Recommended Interval (as needed)
1 Delivery is made to the tank(s).
2 Delivery person provides a receipt with the volume delivered, date, and time. Skip to Step 4 if
entering delivery information at the PC.
3 Insert the delivery card/key into the fuel management system and enter the data.
4 Enter delivery data at the PC (Files, Tanks, Enter Delivery)
Totalizer - Recommended Interval, Once a Day
1 Ensure that no one is pumping. Block off island if necessary.
2 Read the totalizers for each pump. If you are entering data at the PC, take a note of date/time.
3 Stick the tanks and record the level information. If you are entering data at the PC, take a note
of date/time, and skip to Step 6.
4 Insert the totalizer card/key into the fuel management system and enter the data.
5 Insert the dipstick card/key into the fuel management system and enter the data.
6 Resume fueling at the site.
7 Enter the data at the PC if not using totalizer or dipstick card/key (Files, Tanks, Enter Totalizer
and Files, Tanks, Enter Stick Reading).