Preset, Add/edit preset, Delete preset – Grandstream GVC3200 User Guide User Manual
Page 40: Figure 17 gvc3200 add preset screen
Firmware Version 1.0.1.5
GVC3200 User Guide
Page 39 of 97
PRESET
ADD/EDIT PRESET
The users can create and save maximum of 24 camera presets, with each preset storing the camera
position and focal length. Follow the steps below to add preset:
1.
Access camera screen and press the red shortcut key on the remote control to access preset screen.
Figure 17 GVC3200 Add Preset Screen
2.
Select the preset window and press the blue shortcut key on the remote control to access the editing
screen.
3.
Adjust camera position and zoom in/zoom out using the remote control.
4.
On the remote control, press the "OK" key to save the preset, or press Back key
to cancel.
5.
To edit the existing preset, press the blue shortcut key on the remote control to access the editing
screen to edit.
DELETE PRESET
Access the preset editing screen, select preset and press the red shortcut key on the remote control to
delete it.