Redial, Dialing a number via contact, Dialing a number via call history – Grandstream GVC3200 User Guide User Manual
Page 47
Firmware Version 1.0.1.5
GVC3200 User Guide
Page 46 of 97
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
1. By default, the GVC3200 allows users to press # key as SEND key. This behavior can be disabled via
option "Use # as Dial Key" under web GUI.
2. When entering initials or full spellings of a name that exists in the contact, this contact will show in the
dropdown list. For example, if the user inputs Amy by pressing the corresponding digits "2" (ABC), "6"
(MNO), "9" (WXYZ) on the remote control, Amy's name and number will be displayed in the list if it
exists in the contact. Users can then select it to dial out.
--------------------------------------------------------------------------------------------------------------------------------------------
REDIAL
Users can dial out the last dialed number if there is dialed call log. Access the dial screen and then press
"#" key or
on the remote control to dial out.
DIALING A NUMBER VIA CONTACT
Follow the steps below to dial a number via Contacts.
1.
On the LCD display device, access Contacts by tapping on
on home screen.
2.
Navigate and select in the contacts entries using the remote control navigation keys.
3.
Press
on the remote control to dial out.
DIALING A NUMBER VIA CALL HISTORY
1.
On the LCD display device, access Applications on home screen and access call history by selecting
icon
.
2.
The LCD will display all call history types. Navigate in the call history list by selecting the call history
category. Select the call history entry you would like to dial out.
3.
Press
on the remote control to dial out.