Greenheck Melink IH3 Operations User Manual
Page 6
V. Touchpad
The Touchpad is the primary user interface point of the Intelli‐Hood system. Every Intelli‐Hood
is equipped with at least one Touchpad. Some systems are installed with multiple Touchpad’s. Figure 1
illustrates the Touchpad and descrptions of each component are listed below.
Figure 1: Touchpad
Fans Button
The Fans Button is typically used to change the state of the system between STANDBY MODE (exhaust
fans off) and ENERGY SAVING MODE (exhaust fans running).
Lights Button
The Lights Button is typically used to turn the lights of the hood on/off. This function is optional and
may not be used in all installations of Intelli‐Hood. Consult the design documents of your particular
installation to determine if this button is used.
Display Screen
The Display Screen shows the operational state of the Intelli‐Hood system. Symbols and Messages that
appear on the screen are explained elsewhere in this manual.
LIGHTS BUTTON
FANS BUTTON
SOFT KEY
BUTTONS
ARROW
BUTTONS
DISPLAY
SCREEN