Greenheck Utility Distribution System - Manual (Page 13)

GREENHECK
¨ October 1999
13
GENERAL PLUMBING OPERATING INSTRUCTIONS
1. Open and close position of quarter turn ball valve.
2. To operate quick disconnects:
To connect, merely pull back sleeve, and push plug into socket. To
disconnect, pull back sleeve, unlocking coupling.
3. CAUTION! Do not place hands on or near steam piping without
proper protection.
4. To clean behind equipment:
a. Pull out all equipment to be cleansed.
b. Disconnect all hose and cord assemblies
NOTE: All branch connections that have quarter turn ball valves
should be turned off before disengaging hoses.
c. Wipe down top of raceway to prevent dust build-up.
d. Wipe off condensate from water and steam hoses, if any.
e. Reconnect all hose and cord assemblies.
f. Turn on all quarter turn ball valves slowly to the open position.
g. Set equipment back in place.
closed position
open position