Highgear Loft - Manual (Page 17)

29 ALTIWARE SERIES
english
30 LOFT
english
NOTE
FUNCTIONAL SPECIFICATIONS AND RANGES ALARM FUNCTIONS
SELECT ALARM 1 AND 2
1. Advance to the Alarm (ALRM) screen using QUICK PRESSES of the S4 key
The top line will show AL-1 or AL-2. Change between Alarms using QUICK
PRESSES of the S2 key
The middle line will show the time for which the alarm is set.
The bottom line will show ON or OFF indicating the status of the alarm.
2. Turn the alarm on or off using a QUICK PRESS of the S1 key
SETTING THE ALARM
1. Advance to the Alarm (ALRM) screen using QUICK PRESSES of the S4 key
2. Select which alarm you wish to program using QUICK PRESSES of the S2 key
3. PRESS & HOLD the S5 key to enter the setting sequence
4. Adjust the Hours using QUICK PRESSES of the S1 and S2 key
5. QUICK PRESS the S4 key to set hours and advance to setting minutes
6. Adjust the Minutes using QUICK PRESSES of the S1 and S2 key
7. QUICK PRESS the S4 key to set minutes and advance to set Chime
8. Select Chime ON or OFF using quick presses of the S1 and S2 keys
9. QUICK PRESS the S5 key to set the Chime and exit the Alarm Setting sequence.
The Chime is a single beep each time a key is pressed and a double beep at the
start of each hour. The Key Press Chime is useful if you are trying to operate the
watch under circumstances where it is difficult to look at the watch to confirm that
an action has taken place when a key is pressed.
FUNCTIONAL SPECIFICATIONS AND RANGES
GENERAL
Operational Temperature -10C to +50C/ 14F to 122F
Water Resistance 3ATM
Watch Battery CR 2032 3v Lithium
Heart Rate Transmitter Battery CR 2032 3v Lithium
Auto Calendar 2000-2049
ALTIMETER
Range -702 to +9158m / -2306 to +30,045ft
Resolution 1m / 1ft
20 Memories with Date, Time and Altitude
THERMOMETER
Range -10 to +50C / +14 to +122F
Resolution 0.1C/0.1F
BAROMETER
Range 300 to 1100mbar/hPa or 8.86 to 32.48 inHg
Resolution 1mbar/hPa or 0.01inHg
HEART RATE MONITOR
Range 30-240 Beats per Minute
Resolution 1 Best per Minute
% of Maximum Heart Rate 1-100%
CHRONOGRAPH
Range 24 hours
Resolution 0.01 second for first hour; 1.0 second for hours 2-23
SET DAILY ALARM
The Loft unit is equipped with two individual daily alarms. Each alarm can be set to sound at a given hour and minute.
Once either alarm is programmed it is automatically set to ON. Active alarms will sound at the programmed time in both
Time zone 1 and Time zone 2.
RESETTING THE WATCH
To RESET THE WATCH back to its default values press the S1, S2, S4 and S5 keys down at the same time. The display
will light up showing all segments followed by a sequence of screens showing various numbers. The watch will then
automatically change to the time of day screen at 12 o’clock on the first of January.