Hypertherm Duramax Hyamp Robotic Torch - Manual (Page 15)

Duramax/Duramax Hyamp Robotic Torches Service Manual 807460 15
Section 1
Specifications
Introduction
The Duramax robotic torch line consists of 3 torches: 180°, 90°, and 45°, designed for use with the Powermax65 ® ,
Powermax85, and Powermax105 systems. The Duramax robotic torches are not compatible with the Powermax125
system. These torches use only Duramax consumables.
The Duramax Hyamp robotic torch line also consists of 3 torches: 180°, 90°, and 45°, designed for use with the
Powermax65, Powermax85, Powermax105, and Powermax125 systems. These torches use only Duramax Hyamp
consumables.
Both lines of torches are designed for use in robotic applications. They can also be used in other mechanized
applications where careful positioning of the torch and the ability to approach the workpiece at an angle are important
considerations.
The FastConnect™ quick-disconnect system makes it easy to remove the torch for transport or to switch from one torch
to the other if your applications require the use of different torches. The torches are cooled by ambient air and do not
require special cooling procedures.
Duramax and Duramax Hyamp robotic torches comply with IEC 60974-7 and are not suitable for use in the rain or snow.