Hypertherm HT4001 - Manual (Page 46)

2-13 HT4001
QUICK REFERENCE TO CABLE / HOSE DIMENSIONS
The following figures are a one-to-one representation of the HT4001 system interconnecting
cables and hoses. Figure 2-9 shows cables and hoses that would lay in the rail at the site.
Figure 2-10 shows cables and hoses that would lay in the cutting machine's cable/hose carrier.
The rulers have been added to use as a guide. Arrangement of cables and hoses laying in rails or
carriers are roughly suggested here.
1 2 3 4 5 6
Figure 2-9 Cables / Hoses in Rail
12
Figure 2-10 Cables / Hoses in Machine Cable/Hose Carrier
1 2 3 4 5 6
12
10 13 15 29 30
1-1/2"
1/4" 1/4"
1/2" 1/2" 1/2" 1/2"
5/8"
1"
Key - Figure 2-10
10 Shld Leads - Trch/RHF Csl
13 Leads - Gas Csl/Mtr Vlv Csl
1/2" Preflow Hose
1/2" Cutflow Hose
1/2" Gas Csl/Vlv Csl Cbl
15 Inj. Hose - Gas Csl/Trch
29 Ind. IHS Lead Set
1/2" IHS Air Cyl. Hose
1/4" IHS Snsr Probe Cbl
(2)
30 W/M System
1" W/M Pump to
W/M Hose
5 9 14 16 18 21 22
7/8"
Key - Figure 2-9
5 Cable - Tmr-Cntr/PS
9 Leads - PS/RHF Csl
3/8" RHF Csl Cntrl Cbl
7/8" Neg. Cbl (2 w/slave)
1/4" Pilot Arc Cbl
14 Inj. Hose - Gas Csl/RHF Csl
16 Cable - Gas Csl/PS
18 Cable - PS/Rem. V/C
21 Cable - PS/IO Mach. Comp.
22 Cable - PS/VC Mach. Comp.
26 Cooling Hoses -
WC/RHF Csl (2)
29 Ind. IHS Lead Set
3/8" IHS Cntrl Cbl
30 W/M System
3/8" W/M Air Cntrl Cbl
3/4" W/M Air Cntrl Hose
1" W/M Pump to
W/M Hose
31 Hose - Supply/Gas Csl
3/4" Oxygen Hose
32 Hose - Supply/Gas Csl
5/8" Nitrogen Hose
5/16"
3/8"
5/8"
1/2" 1/2"
1/4"
5/8" 5/8"
3/8" 3/8"
3/4"
1"
3/4"
5/8"
7/8"
3/8"
1/2"
26 29 30 31 32