IHSE USA 480 Series Draco tera enterprise - Manual (Page 157)

Operation
2013-08-14
157
Pos: 96 /806-IHSE/Betrieb/Bedienung über HotKeys/480-xx/UEB_Bedienung_über_Hotkeys @ 7\mod_1309939558243_6.doc @ 53464 @ 2 @ 1
6.1 Operation via 'Hot Keys'
Pos: 97 /806-IHSE/Betrieb/Bedienung über HotKeys/480-xx/Direktumschaltung @ 7\mod_1309940339211_6.doc @ 53490 @ 3 @ 1
6.1.1 Direct Switching
The direct switching by favorites on a keyboard is the fastest possibility for
a user to switch at his console between different CPUs. There is a
possibility to switch video, keyboard and mouse or only video.
Direct Switching of Video, Keyboard and Mouse
1. Start Command Mode with the 'Hot Key'.
For control, the LEDs Shift and Scroll flash at the keyboard, if
Command Mode is activated.
2. Enter the index number of the new CPU from the list of favorites and
confirm with <Enter>.
At the same time the Command Mode is closed and the console is
connected to the new CPU with complete control.
Example: Switching to favourite CPU 7 with video, keyboard and mouse
<left Shift>, <left Shift>, <7>, <Enter>
Best results regarding switching time can be achieved by using identical
mice, keyboards and monitors. This contributes to a smooth and seamless
direct switching of the matrix.
Switching in Private Mode
1. Start Command Mode with the 'Hot Key'.
For control, the LEDs Shift and Scroll flashes at the keyboard, if
command mode is activated.
2. Enter the index number of the new CPU from the list of favorites and
confirm with <left Shift>, <Enter> pressed at the same time.
At the same time the Command Mode is closed and the console is
connected to the new CPU with complete control in Private Mode.
Example: Switching to favorite CPU 3 in Private Mode
<left Shift>, <left Shift>, <3>, <left Shift>, <Enter>