Mobility, Video – innovaphone myPBX Version 11 R1 User Manual

Page 10

background image

Operating manual: innovaphone myPBX

Page 10 / 25

Once you have set up a target number for the call diversion, you can switch the call
diversion on and off with a simple click.


The innovaphone Mobility solution allows mobile telephones to be integrated in the PBX.
You can configure the call diversion for this as long as a mobile telephone has been
configured for you.

Switching Mobility on and off does not mean you actually switch a call diversion, instead you
switch the “Forking” (simultaneous ringing) on your telephones on and off.


The video connection is set up when the callers at both ends have Video telephony
enabled. In the Video telephony interface you can tell if Video is enabled or disabled. You
can set up the configuration with your preference if your preference is to use Video
telephony or if you would prefer to decide individually for each call.

At the top you can see the icon with enabled Video telephony, Video telephony is disabled
in the example below.


The size of the Video window can be changed. Resolution and width-to-height ratio remain
the same. The control picture from your own camera can be moved to any of the four
corners. To do this, click on the orange coloured edge of the Video window.