Investing – Ivoclar Vivadent IPS InLine System User Manual

Page 61

Advertising
background image

61

Investing

Investing is carried out using either IPS PressVEST (e.g. overnight) or IPS PressVEST Speed. For that purpose, the IPS Silicone
Ring with the matching investment ring gauge is used. Determine the precise wax weight as follows:
– Weigh the ring base (seal the opening of the ring base with wax).
– Position the objects to be pressed on the ring base and attach them with wax. Weigh again.
– The wax weight is calculated by deducting the weight of the ring base and the weight of the framework (including

opaquer) from the total weight.

Please refer to the Instructions for Use of the corresponding investment material for the detailed processing parameters.
The following procedure is recommended:
– Do not use a debubblizer on the wax objects. Remove separator thoroughly with oil-free compressed air.
– Mix the investment material. The investment material contains quartz powder. Therefore, avoid the inhalation of dust.
– Use a suitable instrument for the fine investment of the cavity. Make sure that the delicate wax margins are not dam-

aged.

– Carefully place the IPS Silicone Ring on the ring base without damaging the wax objects. The silicone ring must sit flush

on the investment ring base.

– Subsequently, carefully fill the investment ring with investment material up to the marking and position the ring gauge

with a hinged movement.

– Allow the investment ring to set without manipulating it.
– Do not use IPS PressVEST for investment over the weekend to prevent crystallization.

Investment material mixing ratio

Investment material

100 g investment ring

200 g investment ring

300 g investment ring

IPS PressveSt

13 ml liquid

9 ml dist. water

26 ml liquid

18 ml dist. water

39 ml liquid

27 ml dist. water

IPS PressveSt Speed

16 ml liquid

11 ml dist. water

32 ml liquid

22 ml dist. water

48 ml liquid

33 ml dist. water

Number of ingots

100 g

200 g

300 g

Individual objects

Bridge pontics

Wax weight

IPS
InLine

PoM

– Accurate Press-On Technique

0.4 g

0.6 g

1.0 g

1.5 g

2.0 g

1.4 g

2.1 g

3.0 g

4.1 g

5.1 g

3

3–4

4–6

3–4

4–6

6–7

8–9

9–12

1 x XS

1 x S

2 x XS

1 x S +

1 x XS

1 x S +

1 x S

3 x XS

3 x S

6 x XS

3 x XS +

3 x S

6 x S

1

2–3

3–4

4–5

5–6

4–5

5–6

6–7

8–9

9–12

Advertising