Ivoclar Vivadent IPS InLine System User Manual
Page 71
71
Incisal firing
Subsequently, build up the outer enamel layer and fire.
firing parameters for the Incisal firing
T
°C/°F
B
°C/°F
S
min
t
°C /°F/min
H
min
V
1
°C/°F
V
2
°C/°F
930/
1706
403/
757
8
60/108
1
450/
842
929/
1704
Glaze firing
Apply the IPS InLine System Glaze paste on the surface and fire.
firing parameters for the Glaze firing
T
°C/°F
B
°C/°F
S
min
t
°C/°F/min
H
min
V
1
°C/°F
V
2
°C/°F
860/
1580
403/
757
8
60/108
1
450/
842
859/
1578
divesting the veneers
Remove large amounts of die material using a grinding disk. Fine
divestment is carried out with polishing beads at 1 bar (30 psi)
pressure.
conditioning the veneers for adhesive cementation
Etch the inner aspect of the veneer with IPS Ceramic Etching Gel
for 120 seconds in preparation for adhesive cementation. Next,
thoroughly rinse the object with running water and dry.
Important: IPS InLine veneers must be placed with the adhesive
technique.
IPS
InLine
– Veneers