JB-Lighting Licon FX - Manual (Page 37)

12.02.2010 V1.0 -37-
The softkey MEMO is used for backup of all cue and chase data as well as the fader
assignments. The corresponding backup files have the file name extension “.LFM“.
The softkey CONF is used for backup of all CONFIG data except user profiles. The
corresponding backup files have the file name extension “.LFC“.
7.3.2 Storing console data
The softkey SAVE is used for the storage of console data. Press this softkey and the
following submenu is shown:
Select the desired file format and the following is shown on the display:
This submenu exclusively shows files of the selected file format with their
corresponding extension as well as directory entries.
If you wish to store data to another directory, select this desired directory as
described above. For this purpose, the menu item FNAME must not be displayed
inverted. Deactivate an inversion by pressing the softkey FNAME.
In order that data can be stored create and enter a file name with no more than 8
characters.
The following two possibilities are available for this:
Firstly, you can enter the file name using the encoder, the softkey INSCH (insert
character) and the softkey DELCH (delete character). The menu item FNAME must
be displayed inverted. If this is not the case, activate the inversion by pressing the
softkey FNAME.
Secondly, you can select an already existing file name from the directory with the
encoder for storage of your data. The menu item FNAME is not displayed inverted
here. If inverted, deactivate the inversion by pressing the softkey FNAME.
To execute the storage process, press the softkey EXEC.
The menu item EXEC will only be displayed, when you have defined a file name
under which you want to store the console data. If a file of the selected format and
with identical file name already exists in the current directory, you are prompted to
acknowledge that the file will be overwritten.
7.3.3 Loading console data
The softkey LOAD is used to load previously saved console data. Press this softkey
and the following submenu is displayed: