JLCooper Eclipse Ethernet 2.6 for OSX - Manual (Page 41)

MIDI Tab
An Eclipse can be made to appear as a MIDI device to MIDI applications. Any Eclipse
control can be programmed to send and respond to a MIDI message.
There are three radio buttons for choosing the type of MIDI message to assign.
None No MIDI message for the selected control. If some other type of
action has already been assigned, the None button will be selected.
Clicking on the None button will delete the currently assigned
action.
Native MIDI Native MIDI actions send and respond to the Eclipse hardware’s
built in MIDI protocol. You would typically use this setting with an
application which directly supports the Eclipse (or MCS-3000 /
MCS-Spectrum) protocol. It could also be used with an application
that has a MIDI “Learn” feature.
For convenience, choosing Set all Controls to Native MIDI in the
Actions menu will assign Native MIDI actions to all of the Eclipse
controls on all layers in the current keyset.
Custom MIDI Custom MIDI actions send and respond to user defined MIDI
messages.
Eclipse Ethernet Software
38