JLCooper Eclipse Ethernet 2.6 for OSX - Manual (Page 45)

Emulation Tab
The Eclipse software has the ability to emulate other MIDI based control surfaces. This
feature is useful if you are using the Eclipse with an application which doesn’t directly
support the Eclipse, but which supports one of these other controls surfaces.
You can set any control on the Eclipse to emulate a control on one of these control
surfaces using the Emulation Tab. The Emulation Tab is not available until you turn on
Emulation in the Emulation Menu. Here you can choose None, Mode A, or Mode B.
Mode A and B represent two different control surfaces. Which one you choose depends
on the application you are using with the Eclipse. More on this later.
The contents of the Emulation Tab varies depending on the type of Eclipse control that
is selected. This is what you will see at first if you select a button.
The Control Group popup lists the basic categories of controls that can be emulated by
the selected Eclipse control. Checking Emulate this control: or choosing from the
Control Group popup will assign an Emulation action to the selected control. It will also
Eclipse Ethernet Software
42