Kemppi FastMig X 350 - Manual (Page 14)

FastMig X 350, X 450
12
EN
3. MENU button
This button takes you to the main menu list. Proceed following the instructions on screen.
X 37 main menu list
Edit Channel
Make changes to existing welding channel
User Identification Selecti one user out of ten
Weld Data Check out the values of the last weld
System Config Menu Show device configuration and information
Language Select your menu language
Select Feeder (WF#) Select another parallel wire feeder as a setup target
MMA/CC/CV Mode Activate MMA welding, or use CC or CV mode for ArcFeed or MasterTig LT
250
4. Control knob
Turn the knob to change the value of the selected parameter. In MMA/CV/CC mode when
panel is in default initial view (channel information), knob can be used to adjust current
(MMA and CC) or voltage (CV).
5. Menu browsing buttons
Use up and down arrows to move the selection up and down in the menu structure. In
MMA/CV/CC mode when panel is in default initial view (channel information), Up/Down
buttons can be used to adjust Arcforce (MMA) and Dynamics (CV/CC).
6. Menu shortcut buttons
• F1 (CHANNEL INFO) displays the basic data recorded to the displayed channel. Pressing
F1 multiple times gives more information of the selected memory channel. Keeping F1
pressed while turning the machine ON restores the menu language to English.
• F2 (USER) Browses and selects users: 1…10, Administrator. When MMA/CC/CV is
selected, only Administrator is allowed.
• F3 (WF#) Selects another wire feeder as a setup target. Panel allows selecting only those
WF numbers that are found connected on the system. When MMA/CC/CV is selected, the
display shows text ”MMA/CC/CV Mode”.
NOTE! FastMig X power sources allow up to 3 wire feeders to be connected to one power source.
Only one wire feeder can be active at a time and must be selected before it will operate.
7. LCD menu display
8. Soft key buttons for menu selection
Use these buttons to select menu items. Their functions depend on selected menu items.
The function is shown on the display.