Kemppi FastMig X 350 - Manual (Page 31)

29
© Kemppi Oy / 1520
EN
Remote control unit R30 DataRemote 10 m 618542001
Remote control extension cable 10 m 6185481
Software installation device DataGun 6265023
NOTE! WiseRoot+™ and WiseThin+™ welding processes are not available with SuperSnake sub
feeder.
10. TECHNICAL DATA
FastMig X 350 X 450
Connection voltage 3~50/60 Hz 400 V, -15…+20 % 400 V, -15…+20 %
Rated power 60 % ED 22.1 kVA
80 % ED 16.0 kVA
100 % ED 15.3 kVA 16.0 kVA
Connection cable HO7RN-F 4G6 (5 m) 4G6 (5 m)
Fuse Delayed 35 A 35 A
Output 40 °C 60 % ED 450 A
80 % ED 350 A
100 % ED 330 A 350 A
Welding current and voltage range MMA 15 A/20 V – 350 A/46 V 15 A/20 V – 450 A/46 V
MIG 20 A/12 V – 350 A/46 V 20 A/12 V – 450 A/46 V
Max. welding voltage MMA 46 V 46 V
Open circuit voltage MMA U
0
= 70 – 98 V
U
av
= 50 V
U
0
= 70 – 98 V
U
av
= 50 V
MIG/MAG/Pulse U
0
= 80 – 98 V U
0
= 80 – 98 V
Open circuit power 100 W 100 W
Power factor at max. current 0.85 0.88
Efficiency at 100 % ED 87 % 87 %
Operating temperature range -20…+40 °C -20…+40 °C
Storage temperature range -40…+60 °C -40…+60 °C
EMC class A A
Minimun short circuit power S
sc
of supply network* 5.5 MVA 5.5 MVA
Degree of protection IP23S IP23S
External dimensions L x W x H 590 x 230 x 430 mm 590 x 230 x 430 mm
Weight 38 kg 38 kg
Voltage supply for auxiliary devices 50 V DC / 100 W 50 V DC / 100 W
Fuse (auxiliary device) Delayed 6.3 A 6.3 A
Voltage supply for cooling unit 24V DC / 50 VA 24V DC / 50 VA
The minimum recommended generator output is 35 kVA.
* See section 2.2: Distribution network.