Kemppi FastMig X 350 - Manual (Page 15)

13
© Kemppi Oy / 1520
EN
4.2 Using the menus
4.2.1 Selecting the interface language
The default menu language is English. If you want to select another menu language, do the
following:
1. Connect the mains power and switch on the power source at the main switch.
• If this is the initial system activation (if SYSTEM OFF text is in the display), you may
need to press and hold the POWER ON button in the to left corner of the X 37 control
panel. Hold the button down for 5 seconds.
2. Press the MENU button to display the main menu, which includes 7 menu items.
• You can move around in the menu list by pressing the up and down arrow buttons.
• As you browse the menu item list, the currently selected item is shown at the bottom
of the display, marked as 1/7, 2/7, 3/7 etc.
• The selected menu item is marked with a black arrow-shaped cursor.
3. Browse to the menu item LANGUAGE (5/7) and press the SELECT soft key button.
4. Browse to your language and press the SELECT/SAVE soft key button. Your language choice is
now confirmed and will remain selected unless you change it later.
4.2.2 About memory channels
You can have several setups of welding parameter values for use in various welding
applications. These setups (or welding jobs) are stored as memory channels in X 37 control
panel.
Up to 10 user profiles can be defined in one FastMig X unit, and each of them are assigned
up to 10 memory channels. So, you have maximum of 100 memory channels to store your
frequently used welding jobs. In addition to them, there are 10 memory channels available for
MMA/CC/CV use.
To define a new welding job, you need to make the necessary welding parameter selections
and then save them to a memory channel of your choice.
When you want to use these settings, you simply select the corresponding memory channel
number on the power source or wire feeder control panel and start welding. Only the most
often used controls are available in the wire feeder control panel, making welding easy and
convenient.
You can use and update any memory channel, unless it is locked via the four-digit
administrator pin code lock.
4.2.3 Creating the first memory channel
If you are starting with a new FastMig X power source that contains no memory channels,
follow these steps to create the first memory channel.
1. Power on the machine from the main switch. You may need to press the control panel's Power
On button for 5 seconds to activate the X 37 control panel.
2. An empty memory channel appears. Press the NEW soft key.
3. With Create New selected, press SELECT soft key.
4. Select the desired welding process and other welding parameters.
• Use up and down arrow buttons to move around in the menus
• Approve selections by pressing the SELECT soft key.
5. When you have made all settings , press SAVE soft key to store the settings in the active
memory channel.