Kemppi FastMig X 350 - Manual (Page 5)

3
© Kemppi Oy / 1520
EN
1. INTRODUCTION
1.1 General
Congratulations on choosing the FastMig X welding equipment. Used correctly, Kemppi
products can significantly increase the productivity of your welding, and provide years of
economical service.
This operating manual contains important information on the use, maintenance and safety of
your Kemppi product. The technical specifications of the equipment can be found at the end
of the manual.
Please read the operating manual and the safety instructions booklet carefully before using
the equipment for the first time. For your own safety and that of your working environment,
pay particular attention to the safety instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi web site at www.kemppi.com.
The specifications presented in this manual are subject to change without prior notice.
Important notes
Items in the manual that require particular attention in order to minimise damage and
personal harm are indicated with the ’NOTE!’ notation. Read these sections carefully and follow
their instructions.
Disclaimer
While every effort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specification of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior written permission from Kemppi.
1.2 About FastMig X 350 and X 450
FastMig X 350 and X 450 are multi-purpose welding power sources designed for demanding
professional use. They are suitable for synergic pulsed MIG/MAG, synergic 1-MIG and basic
MIG/MAG welding, as well as the modified WiseRoot+™ and WiseThin+™ processes. They can
also be used as a welding power source for MMA welding. TIG welding is also available when
connected to MasterTig LT 250.
Control panel X 37 is included in the delivery for selecting, setting and managing the welding
system prior to and during system use.
FastMig X 350 and X 450 offer a multi-process solution for a wide range of welding
applications. Various cable options, welding software options, remote control units including
tablet computer based ARC Mobile Control (adapter included with WFX 200 AMC and 300
AMC wire feeders) and other accessories are available for this product. Please see the list at the
end of this manual.