Connecting an ipod, Ipod stand, Required system – Marantz NA7004 User Manual

Page 13

Advertising
background image

7

ENGLISH

Getting Started

Connections

Connections

Basic Operations

Advanced Operations

Troubleshooting

Explanation terms

Information

Specifi

cations

Index

Connecting an iPod

Cables used for connections

Audio cable (sold separately)

iPod cable

iPod

To connect an iPod to this unit, use the iPod cable supplied with the
iPod.

n Supported iPod models

iPod stand

You can set your iPod or iPhone on the supplied iPod stand.

n Setting up the iPod stand

Use the procedure below to set up the iPod stand.

q

w

e

Required system

n Broadband internet connection

n Modem

Device that connects to the broadband circuit and conducts
communications on the Internet.
A type that is integrated with a router is also available.

n Router

When using this unit, we recommend you use a router equipped
with the following functions:
• Built-in DHCP server

This function automatically assigns IP addresses on the LAN.

• Built-in 100BASE-TX switch

When connecting multiple devices, we recommend a switching
hub with a speed of 100 Mbps or greater.

n Ethernet cable (CAT-5 or greater recommended)

• Use only shielded STP or ScTP LAN cable which is available at

retailer.

• Some fl at type Ethernet cables are easily affected by noise.

We recommend using a normal type cable.

• If you have an Internet provider contract for a line on which network

settings are made manually, make the settings at “Network
connecting (DHCP=Off)” (vpage 24).

• With this unit, it is possible to use the DHCP and Auto IP functions

to make the network settings automatically.

• When using this unit with the broadband router’s DHCP function

enabled, this unit automatically performs the IP address setting and
other settings.
When using this unit connected to a network with no DHCP function,
make the settings for the IP address, etc., at “Network connecting
(DHCP=Off)” (vpage 24).

• When setting manually, check the setting contents with the network

administrator.

NOTE

• A contract with an ISP is required to connect to the Internet.

No additional contract is needed if you already have a broadband
connection to the Internet.

• The types of routers that can be used depend on the ISP. Contact an

ISP or a computer shop for details.

Marantz assumes no responsibility whatsoever for any
communication errors or troubles resulting from customer’s network
environment or connected devices.

• This unit is not compatible with PPPoE. A PPPoE-compatible router

is required if you have a contract for a type of line set by PPPoE.

• Do not connect an NETWORK connector directly to the LAN port/

Ethernet connector on your computer.

Connecting to a home network (LAN)

1.NA7004N_ENG_0826.indd 7

1.NA7004N_ENG_0826.indd 7

2010/08/26 19:16:08

2010/08/26 19:16:08

Advertising