Measurement Computing CB-7000 Utilities - Manual (Page 15)

11
Figure 2-5. Windows Program Menu.
When 7000UTIL.EXE is loading, a window displays to show the startup picture (Figure 2-6). By
default, the startup window will stay on about 3 seconds.
Figure 2-6. The startup picture.
During the startup time, the 7000 UTILITY will read the file ICPCON.CFG to get the COM port,
baud rates and checksum information. After startup, the main window of 7000 UTILITY will
come on (there is more information in section 2-2). and start the searching process automatically.
It reads COM po rt number, baud ra tes and checksum information. If it fails to read the
ICPCON.CFG (if for example, the information does not exi st), the default value for COM port
is 2, baud rate speed of 9600 and checksum is enabled. This means that the searching process
limit is COM 2 and baud rate speed is 9600. When quitting the 7000U TIL.EXE, the selected
COM port, baud rates and checksum are stored in ICPCON.CFG.