Metro 1800 Series Mobile Workstation - Manual (Page 16)

16 Metro TM 1800 Series Mobile Workstation Operations Manual
InterMetro Industries Corporation
Powering up the Computer Equipment
Powering up the
computer
equipment You can power up the Mobile Workstation during the initial charge. The
equipment has been designed to operate while mobile or when plugged
into an AC outlet.
Example Location of Computer Power Switch
The ON/OFF switch for the computer is located in the front underneath
the writing surface. Depending on your computer configuration, the
switch may be on the left, middle or right side.
Powering up the
display Depress the power switch on the display to turn on the display. The
display can be left on at all times, because a power saving mode shuts
down the display when no video signal is present.
Starting Windows and Wireless Network
The computer starts with a Windows operating system preinstalled.
Depending on the configuration, you may have a standard installation
or a custom installation for your location that may require you to enter
Windows authorization codes. All codes along with a Windows
installation CD are shipped with the Mobile Workstation. For setting-up
the wireless LAN and connecting to the hospital network, consult your
IT department.
Power
Switch