Metro 1800 Series Mobile Workstation - Manual (Page 31)

Metro TM 1800 Series Mobile Workstation Operations Manual, L01-503 31
InterMetro Industries Corporation
Power Supply
Your Metro TM 1800 Series Mobile Workstation may be equipped with a DC Power Supply
providing a DC voltage output with one of the following battery technologies: Nickel Metal
Hydride (NiMH), Lithium Ion Nano Phosphate (Li-Nano or LiFePO
4
) or Sealed Lead Acid (SLA).
Alternately the Metro TM 1800 may be equipped with an AC Inverter with SLA batteries,
especially to supply portable AC power to a high power equipment load.
Notice: The preparation and operation of the Power Supply are detailed in the respective
supplemental operations manual included with the Mobile Workstation for the Power
Supply installed.
The Power Supply is designed for continuous operation and service is not interrupted by
plugging in or unplugging the Power Supply.
Powering Up the DC Power Supply
The DC Power Supply is controlled by the “ON/Extended Storage” Switch located on the Power
Supply that is typically mounted on the bottom of the Mobile Computing Workstation.
• In the “ON” position, the power supply provides DC voltage power to the Metro TM 1800
Series Mobile Computing Workstation systems. In the “Extended Storage” position,
power is removed from the workstation equipment.
NiMH MPE-7800
SLA MPS-3111
Li-Nano MPS-4007/ NiMH MPS-4008
Example Locations of ON/Extended Storage Switch